Lotus Europa Community
Lotus Europa Forums => Classifieds Forums => FS/WTB: Europa Parts and Stuff => Topic started by: BDA on Tuesday,June 04, 2019, 11:49:14 AM
-
I need a straight right rear lower wishbone half. I have a set of S2 lower wishbone arm but there is interference with the shock.
Thanks!
-
I assume you are also posting on the yahoo list? Or is there a rush of curbing incidents?
I have a set of the arms with the welded-on spacer for the shock. Is this the style you are after? If so, I would gladly trade for your S2 set.
-
Yep, that was me. I thought the ones I had but when I checked the caster on the right, it was out. I'll clean up the pair I have and spray it with black rattle can - or whatever color you want. I'll also check the dimensions before I send them but they are perfect to look at them. There are bushings in them but they a probably the originals so you'd probably want new ones. When I get them cleaned up, I'll pm pictures to you.
Thanks!!
-
Here's the ones I have that I think are for a TC/S:
https://jbcollier.smugmug.com/Lotus-Europa/i-CLD2pq3/A
https://jbcollier.smugmug.com/Lotus-Europa/i-xxQHrrb/A
https://jbcollier.smugmug.com/Lotus-Europa/i-PK9JTtv/A
They are not for sale but I would exchange for good earlier ones that would fit my S1. All lower arms are dimensionally the same but later ones spread out wider between the mounting points.
-
I could have ground some off my arms to make room for my shock but I prefer using the proper arms if possible or aftermarket tubular arms if not.
If you have a nice pair that measure out properly I'll definitely be interested. In the meantime, I'll measure the early pair I have.
-
BDA, Ted Taylor has some for sale on his website.
http://www.taylormadeclassiccars.com/partsselecttype/lotuschassistypeparts.html
-
Thanks Certified, Ted emailed me last night.
-
If there are some available in the US, go for those.