Yesterday I felt like a kid at Christmas, the wheels arrived. Incredibly quick service from Retroford, they received them on Monday, shipped them Tuesday, and they were delivered to my door before I got home yesterday (Wednesday). To say I'm please is an understatement. In between ordering them and receiving them, I've picked up a set of alloy front hubs from Merlin Motorsports in the Ford PCD, bought a pair of Ford Contour front hubs, Ford Focus rear discs, and a pair of Contour CV axles. It turns out that the Contour hub bearing has the same ID and length as the VW Golf bearings that I'm using, so in theory the hubs should press into the uprights with next to no modifications. And, fingers crossed, according to the catalogues I've found online, the Contour outer CV has the same spline count as the VW axle. I think I'm going to try to find a used VW shaft to experiment with before I start working on the car. Other than that, the Miata calipers that I'm using still clear the wheel, even with the slightly larger Focus rotors. Brake balance is going to be a bit off, but that's something to look into a little farther down the line.
The biggest hurdle now is finding suitable tires, it seems 175/70's and 185/70s are readily available. But, I'd really like to find some 205/60's for the rears as the new rims are 6.5" wide. I know a 185 will fit, but I'd still like something a bit wider.
Anyways, here are some pictures: