91
Technical Articles and DIY tools and tips / Re: Registering an Imported Car in the UK
« Last post by BDA on Friday,May 17, 2024, 08:02:03 AM »Sigh….
July 1, 2023 Forum membership reaches 1,465 !!
This Community became 11 years old in April 2023.
Anyways, thats done now so hopefully will get my new age correct reg number in a couple of weeks, and can start taking things apart again now.
Good luck with that. My 8 months getting 3089R registered due to a 75/3089R instead of 74/3089R does sound insignificant v "Champion" and not "Europa".
WTF were they looking at, the spark plugs?
Berni, I made some seats for my home made Can Am car which I modelled after the S2 Europa seats. It was allot of fun sculpting the foam. I had to change the width, back angle and thigh support angle which is why I did not end up using the Europa pans. I used three different durometers to dial in the comfort level. I used a band saw with widely spaced teeth for the main cuts. An ellectric meat knife to rough in some parts. Pneumatic die grinder with coarse discs. Hand block sander with 36 grit paper to finese. Took me about a week of vacation time to do the foam.
Also thinking of aluminum defrost grills, no more warping in the sun.