Lotus Europa Community

Lotus Europa Forums => Garage => Topic started by: invjbo on Monday,April 11, 2016, 02:07:48 AM

Title: Adjusting rear camber with Banks Twin Link
Post by: invjbo on Monday,April 11, 2016, 02:07:48 AM

Hi,

I suspect my car has to much negative camber on the rear, and would like to try and correct this. If i look in the original documentation it says it should be between 0-2 degrees negative. As my car is fitted with an Banks Twin link rear suspension kit and I dont have any specifications for the kit. Does anyone have any specs for this or should i try to adjust it to 0-2 degrees as original?

Best regards
John

Title: Re: Adjusting rear camber with Banks Twin Link
Post by: BDA on Monday,April 11, 2016, 05:39:36 AM

 You should use the camber recommendations in the manual.

Title: Re: Adjusting rear camber with Banks Twin Link
Post by: jbcollier on Monday,April 11, 2016, 06:16:28 AM

Yup, set it to factory specs BUT make sure you also check the rear toe-in which may change with any adjustment you make.