After massaging out my mistakes. I proceeded to lay on 7 coats of Glasurit clear. I spent the better part of a week painting, sanding, painting, sanding.
I laid down 5 build up coats, a lable application, and then another 2 on top. I was super paranoid on my last sanding/leveling. I was worried about sanding out my labels! However, I took my time and didn't make any mistakes on this task. I feel if I had applied the epoxy to the dry veneer I would not have spent so much time with the clearcoat. Finishing off I did a three stage buff, and the results were acceptable.
I looked around for photos of the finished product but can't find them. Just this one (before the last 2 coats) getting measurements for fitment.