Wiper blade refill

[Bryan Boyle]

I have the (I think..) OEM wire frame wiper blade assembly...with the refillable blade.  I'd rather not replace the frame, and thinking that if I could just find the right refill (it's got the squeeze lock on one end...) that would be great (driving home in a downpour last weekend...it was only the upper 1/3 of the windscreen that was getting cleared...the blade is definitely past its prime).

Anyone have a suitable part number for anco or trico that'll fit?  Thought I'd throw out here before surfing, since the knowledge resides here versus whatever duck duck go throws up on the monitor...

TIA

[BDA]

You want ANCO U-16R. I found some on ebay. Anco's website doesn't mention them so I wonder how long they'll be available.

[Bryan Boyle]

You want ANCO U-16R. I found some on ebay. Anco's website doesn't mention them so I wonder how long they'll be available.

Seems like they're discontinued.  I'd hate to have to buy the speedline arms with the new blades that are available from the usual suspects...and the replacement full blades with bayonet fittings are all black.  Sigh.  Progress, right?

[BDA]

I got them from parrishwholesalesurplus on ebay. Maybe you can contact him to see if he can get some more. I don't know how to contact a specific ebay seller with just his ID but this is something else he's selling so you can contact him from this page: https://www.ebay.com/itm/225588682153

[jbcollier]

Trico 43-160, readily available from Amazon and a billion other places.

[kram350kram]

Is this a stock TC wiper arm ? If 43-160's are correct for it they are hard to locate.

[Kendo]

That’s what I have on my TCS.

[BDA]

Yes, that’s a stock TC wiper arm.

[Bryan Boyle]

Is this a stock TC wiper arm ? If 43-160's are correct for it they are hard to locate.

No kidding.  Just spent an hour searching amazon|ebay|AutoZone|pepboys|advance|O'Reilly...all out-of stock.  Did send a message to trico through their website...but I've a suspicion that they'll claim 'supply chain' issues.  The 43- series are still listed on their website, but in the sites above...the common notation is "Out of Stock".

May just bite the bullet and get replacement bayonet blade/holder assemblies and save the OEM to pop on for shows (if they are going to be that pedantic about the correctness of the wiper blades...)

[jbcollier]

Trico 43-160, my local industrial supply has 274 pairs in stock:

https://greggdistributors.ca

[jbcollier]

They have a retail online outlet here:

https://ohcanadasupply.ca/automotive/Automotive-Accessories/Wiper-Blades/tco43130

(click on 16")

Might ship to the US.

[Kendo]

I tried buying some. They only allow “Canada” as the country to ship to. Too bad.

[gideon]

Apparently OER 17528D is an alternative. 

https://www.summitracing.com/parts/oer-17528d
https://www.oerparts.com/product/parts/17528d.html

You can also look for Trico 44-160, CarQuest 453-160, or CarQuest 454-160.  See this post:

https://www.forcbodiesonly.com/mopar-forum/threads/wiper-blade-refill-source.14332/#post-198739

[Bryan Boyle]

Apparently OER 17528D is an alternative. 

https://www.summitracing.com/parts/oer-17528d
https://www.oerparts.com/product/parts/17528d.html

You can also look for Trico 44-160, CarQuest 453-160, or CarQuest 454-160.  See this post:

https://www.forcbodiesonly.com/mopar-forum/threads/wiper-blade-refill-source.14332/#post-198739

I'll buy you the adult beverage of your choice for this info! Thanks, gideon!

[kram350kram]

Found a USA source for refills. Classic Industries Part# 17528D for $16.99. They fit the stock arms, but the end lock spade grooves are a bit short. A small file rectified that. 

https://www.classicindustries.com/product/17528d.html