That’s the bonnet itself? I had to do that repair also. Yes, it’s just that skirt that stiffens the front edge. Make sure when you reattach the hinge bolts that there is some clearance, or slop in the joints so they don’t pull the bonnet corners out. The parts book calls for a nylon(?) washer between the body and bonnet corners that might help keep the clearance right. A bit of a pain to install.
Hi, sorry I probably misdirected you - it's the panel in front of the bonnet behind where the badge is mounted. Similar repair I'd guess.
Thanks for the tip on reassembly - already having nightmares about reassembling this after it's had a professional respray - rolls and rolls of low tack masking tape going to be involved I think, plus domestic lifting assistance.