Author Topic: Door latch fibregalss backing  (Read 4310 times)

0 Members and 1 Guest are viewing this topic.

Offline 1970EuropaGuy

  • Sr. Member
  • ****
  • Joined: Oct 2018
  • Location: Vancouver Island, Canada
  • Posts: 302
    • Lotus Europa Restoration
Re: Door latch fibregalss backing
« Reply #15 on: Monday,February 04, 2019, 08:41:07 AM »
Thanks for all the images and insights. I'm planning on working on this project the next few days, will post an update.

TCS4605R, if you have the time a PDF would be great.
« Last Edit: Tuesday,February 05, 2019, 09:13:44 AM by 1970EuropaGuy »

Offline TCS4605R

  • Full Member
  • ***
  • Joined: Jul 2014
  • Location: USA
  • Posts: 218
Re: Door latch fibregalss backing
« Reply #16 on: Monday,February 04, 2019, 04:12:19 PM »
Attached is a PDF showing the fiberglass door lock cutouts for my right hand door - more or less accurate - no two Lotuses are the same!

Tom
74 TCS - 4605R

Offline 1970EuropaGuy

  • Sr. Member
  • ****
  • Joined: Oct 2018
  • Location: Vancouver Island, Canada
  • Posts: 302
    • Lotus Europa Restoration
Re: Door latch fibregalss backing
« Reply #17 on: Monday,February 04, 2019, 04:50:02 PM »
Attached is a PDF showing the fiberglass door lock cutouts for my right hand door - more or less accurate - no two Lotuses are the same!

Tom
74 TCS - 4605R
Thanks Tom,     :beerchug:

I'll check measurements but this looks great. I know what you mean about no two Lotuses looking the same, I find that in much of my restoration research.

 I'll compare with what I have.

Offline dakazman

  • Super Member
  • *******
  • Joined: Jun 2016
  • Location: Florida
  • Posts: 4,218
Re: Door latch fibregalss backing
« Reply #18 on: Monday,February 04, 2019, 05:32:50 PM »
Thanks Tom , that pdf will definitely guide me to finishing up some unknowns.
Dakazman

Offline 1970EuropaGuy

  • Sr. Member
  • ****
  • Joined: Oct 2018
  • Location: Vancouver Island, Canada
  • Posts: 302
    • Lotus Europa Restoration
Re: Door latch fibregalss backing
« Reply #19 on: Tuesday,February 05, 2019, 07:34:02 PM »
Just finished making an aluminum back plate. A little rough but it's a prototype at this stage and will get sandwiched in glass anyway.

Should work well, thanks for all the help with photos, drawings and suggestions.

I'll post the finished project when I get there. Time for a hard earned beer! :beerchug:
« Last Edit: Tuesday,February 05, 2019, 07:35:42 PM by 1970EuropaGuy »

Offline Yellowbelly

  • Newbie
  • *
  • Joined: Jul 2017
  • Location: Lincolnshire
  • Posts: 27
Re: Door latch fibregalss backing
« Reply #20 on: Wednesday,February 06, 2019, 12:29:41 AM »
Does anybody know what these door latches originally came from as i need a replacement passenger unit (drivers side for those on the other side of the pond :))?

Offline gideon

  • Hero Member
  • *****
  • Joined: Dec 2017
  • Location: Northern NJ
  • Posts: 552
Re: Door latch fibregalss backing
« Reply #21 on: Wednesday,February 06, 2019, 07:44:33 AM »
Round off the corners on that backing plate, otherwise you'll get a stress concentration and the possibility of cracking at the corners.

Offline 4129R

  • Super Member
  • *******
  • Joined: May 2014
  • Location: Norfolk, United Kingdom, not far from Hethel the home of Lotus.
  • Posts: 2,734
Re: Door latch fibregalss backing
« Reply #22 on: Wednesday,February 06, 2019, 07:54:28 AM »
This looks very close.

They made several million of them.

Offline 1970EuropaGuy

  • Sr. Member
  • ****
  • Joined: Oct 2018
  • Location: Vancouver Island, Canada
  • Posts: 302
    • Lotus Europa Restoration
Re: Door latch fibregalss backing
« Reply #23 on: Wednesday,February 06, 2019, 09:04:30 AM »
Round off the corners on that backing plate, otherwise you'll get a stress concentration and the possibility of cracking at the corners.
Thanks, good idea. I'm learning as I go on this project.

Offline rascott

  • Sr. Member
  • ****
  • Joined: Dec 2014
  • Location: california
  • Posts: 250
Re: Door latch fibregalss backing
« Reply #24 on: Wednesday,February 06, 2019, 07:22:56 PM »
i believe some elan models used the same latch.
i had found the same part number listed, as i was looking.

Offline Yellowbelly

  • Newbie
  • *
  • Joined: Jul 2017
  • Location: Lincolnshire
  • Posts: 27
Re: Door latch fibregalss backing
« Reply #25 on: Thursday,February 07, 2019, 12:32:31 AM »
This looks very close.

They made several million of them.

Unfortunately the other side is completely different to the mini ones