Lotus Europa Forums > Members Cars
0453R Rockledge Florida
dakazman:
While waiting for my machinist to come back from holiday, I thought it would be nice to finish up some items that parts came in for.
Distributor, awhile back I disassembled, inspected and ordered some parts for my decellier 4267 distributor. I found a complete spare on the web cheap. It turned out to be better than mine. I took it apart an found a few differences, took a lot of pictures and will post after I write up a frame by frame document explaining each. At least I won’t have to change points on the side of the road now , I’ll just swap out the whole unit.
Dakazman
PS warning:you may need sunglasses.😀😂
BDA:
More shiny stuff! That engine's future is so bright, it's going to need shades! :)
dakazman:
After this I have all the parts to rebuild the original DGV 32/36 Weber carb. Buying a new one may be easier but at least I’ll learn a few things . I have a really good overhaul tutorial.
Hi torque Starter and fuel pump I all that is left before running.
Dakazman
dakazman:
I did get a single distributor out of the two. I found some parts missing from the manual. I still need to see if they are missing from the parts catalog. I also found a interesting function built into the points bracket. The bracket floats and has a washer below the bracket not in the manual. Giving the points a sort of centering with the contact side . If anyone can explain jump in .
One of the important items missing from the manual are the plastic insert going into the weights. The other spacer on the weights should rotate on there shafts. My original just had the lower half of the bushing/ insert. If someone has a 3D printer that item would help in any decelleir distributor.
The lobe spacer has only happened n correct way of going on. Bevel down then washer.
I’m all so glad I was able to disassemble and compare the two units. It made me catch a lot of problems before they started.?
Dakazman
Navigation
[0] Message Index
[*] Previous page
Go to full version