Lotus Europa Community
Lotus Europa Forums => Garage => Topic started by: 2766R on Saturday,August 20, 2022, 11:50:13 AM
-
I would like to pass along a mod I did a while back. An easy to remove luggage tray makes life so much easier when preforming routine maintenance. The pictures, I believe, do a better job of explaining than many typed words.
Notes: 1) the Quik_Latch used is: https://www.summitracing.com/parts/qul-ql-25-s15
2) The large support washers are made from 1/16 aluminum X 2 1/2" dia.
3) I made up a couple of hat sections from aluminum round stock to center the latch pins. This was done to, hopefully,
eliminate re-centering the latch pins in the event the cross beam is removed and reinstalled (Not absolutely
necessary)
4) The tray insert is just a piece of cardboard from a large box with a piece of cheep carpet from a local auto parts
store attached with spray adhesive.
I can remove and re-install the tray as quickly an F1 car entering and leaving the pit lane!
Gerry
-
Nice. I used druz fittings in the floor and clips for the rear:
https://jbcollier.smugmug.com/Lotus-Europa/i-RBKK3qz/A
-
That's very nice! :beerchug:
-
Thanks for sharing.