Lotus Europa Community
Lotus Europa Forums => Garage => Topic started by: LeftAngle on Sunday,September 08, 2013, 07:40:15 PM
-
today, I was writing back and forth with an acquaintance in the UK and he sent me this site: http://www.howmanyleft.co.uk/?utf8=%E2%9C%93&q=lotus+europa (http://www.howmanyleft.co.uk/?utf8=%E2%9C%93&q=lotus+europa)
I can't tell if these numbers are waaaay off or not. Does anyone know of similar sites in the U.S., Canada, Australia, Japan?
Bruce
-
Very interesting. I've never seen data like this before, but I sure would like to see a similar chart for Canada.
-
I would highly recommend going to a hydraulic throw out bearing. I did recently and am amazed how much smoother it is to operate. I went with a Tilton bearing and master. I machined a 1/2" 3x6 aluminum bar stock to sit flat on the back of the bellhousing to give the bearing a good surface to mount to. I also moved the stop on the pedal down and to the inboard side to provide a solid stop.
I'm using a quarter master clutch which is pretty stiff, and hydraulic made it so much easier to control (that and I shattered the original clutch fork).
-
Lotusjps - I think a new thread is called for, with full description and pictures please!
-
Wow not sure how this ended up here. I was replying to the thread about throw out bearings.
-
I've just seen it - thanks for the pics etc!