Author Topic: My S2 project is now a driver!  (Read 1437 times)

0 Members and 1 Guest are viewing this topic.

Offline BDA

  • Hero Member
  • *****
  • Joined: Jul 2012
  • Location: North Carolina
  • Posts: 3,216
Re: My S2 project is now a driver!
« Reply #30 on: Sunday,August 06, 2017, 08:18:38 PM »
Very nicely done, Lotus7! It looks like you've done an outstanding job! I'm anxious to hear/see more about your A/C installation as you continue.

Offline Certified Lotus

  • Hero Member
  • *****
  • Joined: Aug 2016
  • Location: Princeton, NJ
  • Posts: 504
Re: My S2 project is now a driver!
« Reply #31 on: Monday,August 07, 2017, 03:45:58 AM »
Nice installation. Any idea How much HP from that engine/carb set up?

Offline Lotus7

  • Newbie
  • *
  • Joined: Aug 2012
  • Location: Utah
  • Posts: 21
    • From the Pit Wall
Re: My S2 project is now a driver!
« Reply #32 on: Monday,August 07, 2017, 06:21:33 AM »
I've not had it on a dyno so everything is just a guess. Years ago I remember see a lot f incremental mods on a stock Ford Focus engine. With headers similar (or identical?) to the ones I have and individual tb's they saw about 150hp on the dyno. To get more than that they had to do a lot of work to the engine. So my guess would be about 150hp. I'm using stock Ford injectors and an Emerald K3 ECU. I have it in their 'adaptive' mode so it is slowly learning exactly where the injection amounts should be. I have most of the map set to between 13.5 and 14.5 fuel ratio depending on the RPM's and throttle position.