Author Topic: Reproducing the Hermes intake manifold  (Read 3531 times)

0 Members and 1 Guest are viewing this topic.

Offline Grumblebuns

  • Super Member
  • *******
  • Joined: Aug 2012
  • Location: San Diego area
  • Posts: 1,469
Reproducing the Hermes intake manifold
« on: Tuesday,February 09, 2016, 02:32:03 PM »
As the title states, I'm looking at having the Hermes manifold reproduced by a local fabricator. I've already given Josh, my fabricator, a spare Hermes manifold to evaluate. His initial estimate is $500 for the first prototype which I will eat and around $300-350 for subsequent copies. I'm totally unfamiliar with the casting of aluminum so excuse my ignorance of the process and terminology. Josh has a 3d printer from which he will produce the mold material for each manifold. Using that mold, Josh will cast the individual manifolds using the metal casting facilities of our local arts academy.

After the first prototype is made, I will no longer have any financial interest in the project and all dealings will be done directly with Josh. I will post pictures of the first prototype for people to evaluate and make their decision.


This will be a slow on going project and no guarantees that it will go to completion. Josh owns and operates a one man performance/tuning/fabrication shop for sports cars, specializing in Volvos. His business comes first but he will work on the manifolds when time permits.

I've set up a poll for people to express their interest. I will try to get the first prototype completed by this coming summer. I'm also wondering if there are any "improvements" people want in the manifold.

The poll is on poll on the Europa mail list.

Joji Tokumoto
Fallbrook, Ca

Offline Grumblebuns

  • Super Member
  • *******
  • Joined: Aug 2012
  • Location: San Diego area
  • Posts: 1,469
Re: Reproducing the Hermes intake manifold - Update 1
« Reply #1 on: Thursday,February 11, 2016, 05:33:48 PM »
I stopped by the shop this afternoon to give Josh a deposit and tell him to go ahead with the manifold. Well, he had already started. With the small 3D printer he has in at the shop, he's making the casting core material in four pieces. The top two halves of the runner sections are complete. The two bottom halves come next, then all four pieces are joined together and the detail work started before the ceramic coating is applied.

He currently has two other manifolds in the pipeline, so the summer time frame may be possible for the first prototype.

To keep overall costs down, any extra ports or add ons will have to be discussed with Josh at the time of order and the extra time and expense in addition to the base order.




I'll make appropriate updates as we get closer to the completion for the first casting.


Offline Lotusnut

  • Newbie
  • *
  • Joined: Apr 2015
  • Location: Wales
  • Posts: 5
    • Whittle books
Re: Reproducing the Hermes intake manifold
« Reply #2 on: Monday,October 31, 2016, 08:34:53 AM »
Hi
I am looking for a Hermes inlet manifold for a Renault Europa.
What happened to your project.
Do you have them for sale.
Do you know someone who does ??
Kevin

Offline Grumblebuns

  • Super Member
  • *******
  • Joined: Aug 2012
  • Location: San Diego area
  • Posts: 1,469
Re: Reproducing the Hermes intake manifold
« Reply #3 on: Tuesday,November 01, 2016, 08:03:54 AM »
Kevin, dealing with specialists shops, you work within their schedules. I suppose I was a bit optimistic when I said that I hoped to have the first manifold ready by summer. My fabricators shop was swamped by work and the Hermes project was pushed to the back burner. I'll try to stop by the shop in the next few days and try to get my project on track.

Update: Oct/2019
This is probably the final update on the Hermes project. While waiting for my fabricator to to get to my Hermes project, I got some quotes from a couple of commercials foundries which I posted in:
http://www.lotuseuropa.org/LotusForum/index.php?topic=3177.0

At this point, this project is dead in the water. No way am I willing to come up with the upfront costs required.


 
« Last Edit: Wednesday,October 09, 2019, 08:12:07 AM by Grumblebuns »

Offline Richard48Y

  • Super Member
  • *******
  • Joined: Oct 2020
  • Location: No. Nevada
  • Posts: 1,485
Re: Reproducing the Hermes intake manifold
« Reply #4 on: Sunday,October 25, 2020, 01:00:22 PM »
If a CAD file is available the quick/cheap way to do this is to 3D Print in wax.
Then do a lost wax sand-casting.
The 3D printing is a bit slow but can be repeated as often as desired.
No need for expensive dedicated patterns.

If a sample is available getting a CAD file done may not be too expensive.
Look into finding a local student who needs a project as practice.

Bonus is that CAD files can be sent via email, so this can be done locally anywhere there is access to a 3D printer and aluminum casting foundry.
I seem to recall that there are some bargains to be had if you can locate a trustworthy eastern block foundry.

Iv'e done some small parts but my casting set is too small for an intake.

Offline Grumblebuns

  • Super Member
  • *******
  • Joined: Aug 2012
  • Location: San Diego area
  • Posts: 1,469
Re: Reproducing the Hermes intake manifold
« Reply #5 on: Tuesday,October 27, 2020, 06:31:02 AM »
Sometime in the future, I'll take a stab at casting the manifold in a home casting process. My fabricator has experience doing this and said he will help me when I start.


Offline Kendo

  • Sr. Member
  • ****
  • Joined: Jul 2015
  • Location: Northern California
  • Posts: 485
Re: Reproducing the Hermes intake manifold
« Reply #6 on: Thursday,October 29, 2020, 10:38:43 AM »
There are places that 3D print aluminum. When my car is painted, I'm thinking of making one of those European high bypass Stromberg manifolds that way. You need a 3D model to get a quote, which has me currently stumped. But if you already have a model, you could at least find out how much they'd charge.

Offline Richard48Y

  • Super Member
  • *******
  • Joined: Oct 2020
  • Location: No. Nevada
  • Posts: 1,485
Re: Reproducing the Hermes intake manifold
« Reply #7 on: Friday,October 30, 2020, 09:04:28 PM »
3D printing is still not a fully mature technology.
It's a an Oohh and Aaahh tech but the affordable units that show up in most "Maker-space" outfits still often have issues with layer adhesion and porosity.
Wax has a low melting point so even the cheap printers can do well with it.